You are here: Electronic Dog Training Collars > BESTSELLER Innotek ADV-300-P Remote Dog Training Collar
 

BESTSELLER Innotek ADV 300-P ADVANCED TRAINER 30-Day Risk Free Money Back Guarantee FREE SHIPPING (US48) 1292List: $169.99Only: $139.95 E-Collars.com. Save money on the BESTSELLER Innotek ADV-300-P Remote Dog Training Collar 300 yard range* / Waterproof collar-receiver & water resistant transmitter Collar uses NimH rechargeable batteries Transmitter uses 2 6-volt alkaline batteries Continuous stimulation and Momentary stimulation instantly selectable at the transmitter 7 variable intensity levels are instantly adjustable at the transmitter Transmitter has separate tone option and LCD display No Risk 30-Day Money Back Guarantee 1 Year Warranty, -- IN STOCK. Usually ships the same business day. ADV-300 Features | Warranty | ADV-300P Collar / Receiver | ADV-300P Transmitter / Remote | Training Tips | Quick Start Guide | Important Advice | Troubleshooting Guide | Register Innotek ADV-300-P Features Adapter: 12v 200 mAmps ( part # 0400012) DC Preferred Batteries: Transmitter uses two 6v alkaline batteries. ( part # BAT-001) Battery life = Up to 30 hours use Charge: A full charge takes 14 hours and lasts up to 75 hours of use. Collar: Rechargeable and waterproof Blue receiver box. Collar measures 2.15" x 1.66" x 1.19" and weighs 9 oz with the strap. Black polyurethane coated web strap (1700118-5). Circumference ranges 9.5" to 19" Probes: included in the RK-11 Range: Up to 300 yards in flat, open terrain. Stimulation: Programmable, 7 levels; Displayed on transmitter Defaults to Level 1 Over-Stimulation protection = 10 second lock-out period after 10 seconds of stim. Tone Key: Sounds the good tone command. Displays "0" and the tone bar when pressed Transmitter: Water resistant and operates one collar. Blue Transmitter measures 3.5" x 1.75" x 0.625" and weighs 2.6 oz. Battery Plug Assembly = 1700130-1 (includes ?O? Ring and split ring) Transmitter Buttons: Continuous = Continuous stimulation Momentary = Momentary stimulation ID = Changes ID Code Tone = Good tone only sounds (no stimulation) *** = Increases stimulation level ↓ = Decreases stimulation level Trans Display: Left side = LO BAT displayed when power is low AND any button is pressed PROG displayed after ID button is pressed TONE BAR displayed when tone is delivered Center = NUMBER identifies the stimulation level Blank = Display blanks 1/2 second after the last button is pressed Video: VIDEO-52 Dog Star training Collar Lights: No light = Collar is off Blinking green = Collar is on Solid green = Lock out mode Pulsating green = Good tone is activated Blinking yellow = Programming mode Blinking red = Low battery (20% or less remaining) Pulsating red = Stimulation is delivered Solid red = Charging ADV-300 Features | Warranty | ADV-300P Collar / Receiver | ADV-300P Transmitter / Remote | Training Tips | Quick Start Guide | Important Advice | Troubleshooting Guide | Register Innotek ADV 300P Limited Lifetime WarrantyADV-300 Features | Warranty | ADV-300P Collar / Receiver | ADV-300P Transmitter / Remote | Training Tips | Quick Start Guide | Important Advice | Troubleshooting Guide | Register Invisible Technologies, Inc., warrants to the original retail purchaser, that Innotek brand products will be free from defects in material and workmanship, under normal use, for a period of one year from the date of the original retail purchase. This Limited Warranty excludes: accidental damage due to dog chews; lightning damage where an INNOTEK lightning protection component is not in use (in-ground pet fencing systems); or neglect, alteration and misuse. Invisible Technologies offers several product exchange options during the warranty period. If service is required, call 1-800-826-5527 to discuss the service plan that best serves your needs. Costs are dependent on the processing time and the desired shipping options. Please do not return this product to your retailer. After one year from date of original retail purchase, we will repair, replace or upgrade your product at a fixed rate based on the component. Invisible Technologies, Inc., shall not be liable or responsible for any incidental or consequential damages resulting from the use of the product or caused by any defect, failure or malfunction of the product, whether a claim is based upon warranty, contract, negligence or otherwise. Innotek ADV-300P Collar / ReceiverADV-300 Features | Warranty | ADV-300P Collar / Receiver | ADV-300P Transmitter / Remote | Training Tips | Quick Start Guide | Important Advice | Troubleshooting Guide | Register Understanding the Innotek ADV-300P Collar/Receiver The Innotek ADV-300P units use a LED light to let you know the status of the collar. Blinking green light -- collar is on and ready to use Pulsating red light -- stimulation is being delivered Pulsating green -- tone only being delivered Blinking red light -- low battery; charge as soon as possible Solid green light -- over-correction timeout; wait 10 seconds Blinking yellow light -- collar should be matched to transmitter Testing the Innotek ADV-300P Receiver Hold the test light across the receiver probes Press the transmitter button for stimulation Test light will illuminate for the length of time stimulation is being delivered The intensity of the light will increase as the level increases Charging the Innotek ADV-300P Receiver The receiver has a long-life NiMH battery. It will take 12-14 hours to fully charge and will operate up 72 hours between charges depending on use and temperature. Extreme temperatures (hot or cold) can significantly affect battery life. Always charge at room temperature. Collar should be fully charged once every 2-3 months. The receiver will need to be matched with the transmitter after charging. (Follow Step 2 of the Quick Start Guide.) Matching the Innotek ADV-300P Transmitter and Receiver - Locate the red dot on transmitter and on receiver. Hold components together at the dots until the receiver LED glows green then amber. Press transmitter button; receiver LED will glow red and deliver stimulation. The components now work together. Perform this step each time you charge the receiver collar, or replace transmitter battery. Innotek ADV-300P Transmitter / RemoteADV-300 Features | Warranty | ADV-300P Collar / Receiver | ADV-300P Transmitter / Remote | Training Tips | Quick Start Guide | Important Advice | Troubleshooting Guide | Register This handheld device signals the collar receiver to produce stimulation and/or tone. The transmitter is waterresistant and should not be immersed in water or placed in a dishwasher. Transmitter Buttons: ADV-300P and ADV-1000P users CONTINUOUS - you control the length of stimulation by the time you press the button. For a short stimulation, press and release the button. For a longer stimulation, hold the button down. A maximum of 10 seconds may be applied before the safety feature to prevent over-correction engages. After 10 seconds, stimulation will be locked out for another 10 seconds. MOMENTARY - delivers a brief, pre-measured tap. ID - selects a random ID Code from 2048 available in case you experience interference problems from other nearby training units. Press and hold the button for 3 seconds. The display will show the letters PROG and quickly scroll through numbers and then go blank. A new code has been selected. Re-match the components as described in Step 2 of the Quick Start Guide. TONE - produces a tone from the collar. No stimulation is delivered. LEVEL UP - increases stimulation level LEVEL DOWN - decreases stimulation level The Innotek ADV-300P Digital Display When either the continuous or momentary buttons are pushed, the display will indicate the stimulation level being transmitted. When the Level UP or Level DOWN button is pushed, the display will show the new level of stimulation. LO BAT appears when the transmitter batteries needs to be replaced. When the tone button is pressed, a small bar will appear to the left of the stimulation level 0 as no stimulation is being delivered. Replacement Batteries for Innotek ADV-300P The Innotek ADV-300P transmitters use two 6-volt alkaline batteries. These are commonly available where you bought your unit, where batteries are sold or order direct from us. Training Tips from InnotekADV-300 Features | Warranty | ADV-300P Collar / Receiver | ADV-300P Transmitter / Remote | Training Tips | Quick Start Guide | Important Advice | Troubleshooting Guide | Register Watch the included video to get the basics for training your dog properly with a remote trainer. Always praise your dog for good behavior! Teach him what the commands mean before introducing the collar as a reinforcement tool. Keep training sessions brief, about ten minutes of training and then a rest or play period of at least equal length. Dogs learn through repetition. You may have better success if you can elicit an undesired behavior when you can anticipate it. For example, if the dog misbehaves and jumps on visitors, have someone come in and out of the front door several times over a half-hour period. You'll be expecting it and will be ready to teach your dog the right behavior. Always end a training session on a positive note. Let the dog have success. This way he'll look forward to the next session. Training should be fun for both you and your dog. Never train when you are angry. If you get frustrated during training, stop and come back to it later.Your dog will learn better when you are both relaxed. We recommend your dog be at least six months old before starting a remote training program. You will be asking your dog to concentrate for periods of time and to remember what you have taught. Young puppies do not necessarily have the required mental development or attention span for these activities. The goal of training is to condition your dog to respond to your verbal commands under all situations. You should plan on using the collar for at least four months. A good rule is, once started with a remote trainer, to always have the collar on when you take the dog out. This will ensure that he will always be imprinted with the correct response to your commands and that you are always in control. Take advantage of the FREE Professional Training Support that comes with your Innotek remote trainer purchase. ADV-300P Quick Start GuideProper Fit: The collar fit should be snug, yet loose enough to allow one finger to fit between the strap and dog’s neck. Fit is important because a loose collar may cause inconsistent performance. It’s okay to trim any excess strap length. Step 1 Power Up Step 2 Match Components Step 3 Adjust the Collar Quick Start Guide ADV-300P, ADV-1000P & ADV-1002 Charge the collar 12-14 hours. Be sure to cover the charge jack with the gray plug when done. Insert batteries in the transmitter positive (+) side out. Turning the Collar ON and OFF Before putting collar on dog, briefly touch the two red paper dots together to turn the collar on. ON - A brief, solid green light and tone indicate that the collar is on, ready to use. A green light will blink while the collar is on. OFF - A brief, solid red light and tone indicate the collar has been turned off. Remove receiver from charger. Light will flash yellow. Press button on transmitter within 30 seconds. The components now work together. Important Advice about using Innotek Training CollarsADV-300 Features | Warranty | ADV-300P Collar / Receiver | ADV-300P Transmitter / Remote | Training Tips | Quick Start Guide | Important Advice | Troubleshooting Guide | Register Read the complete instructions and follow all directions. If you have any questions, please call 1-800-826-5527. This device is intended for use only on dogs. Never attempt to use it for any purpose not described in this manual. Never perform set-up procedures while the collar is on your dog. Any collar worn for extended periods can cause a condition similar to bedsores, known as Pressure Necrosis. To reduce the possibility, you must do the following: Never leave the collar on the dog for more than 12 consecutive hours. Examine the dog's neck daily for any signs of a rash or a sore. Supervise your dog during the first 2 days of training. Check the fit to prevent excessive pressure; you should be able to insert one finger between the collar strap and your dog's skin. Wash the dog's neck area and the probes of the collar weekly with a wash cloth and mild hand soap; rinse thoroughly. If the condition persists beyond 24 hours, see your veterinarian. Always use the rubber insulators between the collar strap and probes to provide insulation in damp conditions. Other collars and metal tags should be removed when using the remote training collar as they may interfere with proper operation. Do not attempt to dismantle or repair any components of this system; doing so will void the warranty in full. The computerized circuitry should be serviced only by an authorized expert. Realize that because dogs have unique temperaments, there is no way of knowing how your dog will react to the introduction of a remote training collar system. For the safety of your dog, a long lead should be used during initial training so you have control of the situation. If you have reason to believe that your dog many pose a danger to others, harm itself, or react adversely to the collar, do not rely solely on this product to train your dog. If your dog shows signs of growling, snarling or biting while using the collar, stop immediately. Aggression in dogs has many causes. We recommend that you consult a knowledgeable professional dog trainer or animal behaviorist with experience with aggressive dogs if your dog has shown any of these characteristics. Occasionally, a dog cannot be trained to respond to a remote training collar. Sometimes even a properly trained dog may disobey a command. Therefore, Invisible Technologies, its distributors, and dealers cannot guarantee that the system will in all cases keep the customer's dog from disobeying commands. Innotek ADV 300P Troubleshooting GuideADV-300 Features | Warranty | ADV-300P Collar / Receiver | ADV-300P Transmitter / Remote | Training Tips | Quick Start Guide | Important Advice | Troubleshooting Guide | Register If the collar appears not to be working, try the following: Adjust the collar strap to fit. Test the receiver, if no light, recharge the battery in the receiver. If the transmitter LED is out, replace the transmitter batteries. Rematch the components as shown in Step 2 of the Quick Start Guide. Check that the probes are tightened. Ensure that the probes are touching the dog's skin. Trim the dog's hair or use the longer probes to ensure proper skin contact. Never shave the dog's neck. Use a stronger stimulation level. If you cannot solve the problem by following these steps, please call 800-826-5527 so Innotek can assist you in fixing the problem. Advanced Trainer ADV-300 Troubleshooting Tips Walk through programming and synchronization. Check batteries for proper size, type, and position. Collar will not deliver stimulation: Re-synchronize and check for stimulation. Collar will not audibly tone: Re-synchronize and check for tone. Collar has solid red light: Place collar on charger for 5 min light out recharge collar Light on try to resynchronize. If it does not synchronize, contact Collar not taking charge: Check adapter and outlet Collar not holding charge: Drain collar completely and recharge 14 hours Make sure receptacle cover is in place when collar is Interference: Change the ID Code and resynchronize. Low Range: Check the antenna on the transmitter. Recharge the collar and/or change the batteries in Losing Programming: Check for contact with other magnets, or metal tags or metal collars on dog. Metal Tags or Collar: Short across the probes, turn the collar on or off, change mode Register Your Innotek ADV-300PYour product can be registered on INNOTEK's website at www.innotek.net BROWSE NEXT: Unleashed Technology Training Collars

Try out our on-line shopping cart! Click the "Add to My Shopping Cart" button. You can always remove it later. Ordering over the internet is safe and easy. Click here to see your order or to check out. -- Go to top of page.