You are here: Electronic Dog Training Collars > Pet Containment Systems >> Innotek Smart Dog Containment Systems >> Installation Guide and FAQ >> Double Loop Installation Back Yard Only.   Double Loop Installation
Back Yard Only.This type of boundary set up produces a double wide field and can be fit to most yards. The double loop is used to define 3 sides of the containment area and the house is used to define the fourth boundary. The 2 wires should be separated by 3-8 feet depending on your field width settings.
Twisted Wire is used for the run from the transmitter (in Garage) to the perimeter. Using 2 pieces of single strand boundary wire twisted together produces no boundary. We recommend you twist this wire using an electric drill or something similar. You want approximately 1 twist per inch. Remember that as it twists it will draw up, so allow plenty of extra length.
We recommend this type of installation for most yards.
This type of installation gives the dog access to the house.
Can be used to produces a double wide field.
Can be fit to most yards.
This type of installation does require more wire than a single loop installation.
Caution: Take care to not create a gap between the fields. We recommend you lay the wire on top of the ground and test the system prior to burying the wire.
Click the picture for a larger view.
BROWSE NEXT: Double Loop Installation Back Yard with Pool or Shed. |
| !--> E-collars Site Map | | |