You are here: Electronic Dog Training Collars > Pet Containment Systems >> Innotek Smart Dog Containment Systems >> Installation Guide and FAQ >> Double Loop Installation with Existing Fencing
  Double Loop Installation with Existing Fencing This type of boundary set up is a variation of the Double Loop Installation. This variation is used where existing fencing defines one or more sides of a yard. Works great if your neighbors have fences on one or more sides of your lot. Use Double Strand wire along the boundary where you have fencing.
Twisted Wire is used for the run from the transmitter (in Garage) to the perimeter. Using 2 pieces of single strand boundary wire twisted together produces no boundary. We recommend you twist this wire using an electric drill or something similar. You want approximately 1 twist per inch. Remember that as it twists it will draw up, so allow plenty of extra length.
This type of installation gives the dog access to the house.
Caution: You should avoid placing the wire close to metallic objects such as chain link fences. We recommend you lay the wire out and test the system with the collar prior to burial. You should also check to see if the collar is activate near the fence in other parts of the yard. If this is the case move your boundary wire further away from the fence. Take care to not create a gap between the fields.
Click the picture for a larger view.
BROWSE NEXT: Combination Installation |
|
E-collars Site Map | | |
Tritronics Collars
